Sekee FM, DFM meters are used to measure the volume and volumetric flow rate of diesel fuel, gasoline, liquefied gas, kerosene, petroleum, petroleum with water, fuel oil and other liquids with dynamic viscosity from 1 to 1000 mPa * s.
The meter can be used in liquid flow control systems in various industries, in stationary technological installations, land mobile facilities for refueling and pumping, in commercial metering systems on river, sea, railway transport and mechanical equipment.
Description of the meters
Sphere of usage:
- for fuel consumers: internal combustion engines, boilers, incinerators;
- in fuel preparation stations, calculating the movement of liquids in technological processes;
- at enterprises of the fuel and energy complex and other industries.
We give a triple quality guarantee and are liable under the contract.
Warranty period - 36 months
We officially prescribe in the contract and secure a legally unprecedented guarantee for the production time.
Guaranteed service life of the measuring chamber - 30,000 hours.
At constant flow rate not higher than nominal and 9000 hours at maximum flow.
Time between failures - 75,000 hours
Provided that the meters are installed and operated in full accordance with our recommendations for use.
Warranty safe conditions
The conditions for maintaining the device warranty are described in the operating instructions. The warranty for the device remains subject to the completion of the device passport.
The meters should be stored in individual manufacturer's packages at the consumer's warehouse at temperatures from -40 ° C to + 70 ° C and relative humidity from 65% at + 20 ° C to 80% at + 25 ° C.
For long-term storage, counters should be stored in dry, heated rooms.
Storage and packaging information
Estimated delivery time of products
All products offered on the official web-site are certified, packaged appropriately and can be shipped to the buyer within five working days from the manufacturer's warehouse.
Sekee FM, DFM series liquid fuel meters operate on the principle of an annular plunger meter.
The peculiarity of the principle is a large measuring range, high accuracy, independence from the viscosity of the measured substance and from the power supply, as well as insensitivity to the flow profile.
Each movement of the plunger generates an electronic pulse on an electronic reader (hall sensor).
For high-quality fuel metering at consumers with a differential fuel flow scheme, as well as for monitoring the flow temperature, a 1-Wire, a temperature sensor is built into the sensor's electronic board. This allows you to automatically adjust the fuel consumption at a differential flow with a difference in flows on the supply and return lines.
The sensor is used in control and measurement systems. Connection to the reader is obligatory. For a differential measurement scheme, we recommend using consumption controllers KR-101, KR-102, manufactured by "Technodar" Group of Companies.
– Fuel consumption meter - 1 pc. – Meter passport - 1 pc. – Test certificate with the mark of Quality Control Department - 1 pc. - Mating part of the connector for connecting the meter to the recorder - 1 piece. – Package - 1 pc.
Complectation
Get a consultation specialist for free
Leave your contact details or write us in messenger which is more suitable for you.
The specialist will contact you and:
Answer all questions which are connecting with technical character
Specialist will suggest options for the implementation of your tasks
Fill the form below
to describe details of the project in the most suitable time for you
Answer all questions about conditions of delivery of meters